to top
Android APIs
public class

ValueAnimator

extends Animator
java.lang.Object
   ↳ android.animation.Animator
     ↳ android.animation.ValueAnimator
Known Direct Subclasses

Class Overview

This class provides a simple timing engine for running animations which calculate animated values and set them on target objects.

There is a single timing pulse that all animations use. It runs in a custom handler to ensure that property changes happen on the UI thread.

By default, ValueAnimator uses non-linear time interpolation, via the AccelerateDecelerateInterpolator class, which accelerates into and decelerates out of an animation. This behavior can be changed by calling setInterpolator(TimeInterpolator).

Developer Guides

For more information about animating with ValueAnimator, read the Property Animation developer guide.

Summary

Nested Classes
interface ValueAnimator.AnimatorUpdateListener Implementors of this interface can add themselves as update listeners to an ValueAnimator instance to receive callbacks on every animation frame, after the current frame's values have been calculated for that ValueAnimator
Constants
int INFINITE This value used used with the setRepeatCount(int) property to repeat the animation indefinitely.
int RESTART When the animation reaches the end and repeatCount is INFINITE or a positive value, the animation restarts from the beginning.
int REVERSE When the animation reaches the end and repeatCount is INFINITE or a positive value, the animation reverses direction on every iteration.
Public Constructors
ValueAnimator()
Creates a new ValueAnimator object.
Public Methods
void addUpdateListener(ValueAnimator.AnimatorUpdateListener listener)
Adds a listener to the set of listeners that are sent update events through the life of an animation.
void cancel()
Cancels the animation.
ValueAnimator clone()
Creates and returns a copy of this Object.
void end()
Ends the animation.
float getAnimatedFraction()
Returns the current animation fraction, which is the elapsed/interpolated fraction used in the most recent frame update on the animation.
Object getAnimatedValue()
The most recent value calculated by this ValueAnimator when there is just one property being animated.
Object getAnimatedValue(String propertyName)
The most recent value calculated by this ValueAnimator for propertyName.
long getCurrentPlayTime()
Gets the current position of the animation in time, which is equal to the current time minus the time that the animation started.
long getDuration()
Gets the length of the animation.
static long getFrameDelay()
The amount of time, in milliseconds, between each frame of the animation.
TimeInterpolator getInterpolator()
Returns the timing interpolator that this ValueAnimator uses.
int getRepeatCount()
Defines how many times the animation should repeat.
int getRepeatMode()
Defines what this animation should do when it reaches the end.
long getStartDelay()
The amount of time, in milliseconds, to delay starting the animation after start() is called.
PropertyValuesHolder[] getValues()
Returns the values that this ValueAnimator animates between.
boolean isRunning()
Returns whether this Animator is currently running (having been started and gone past any initial startDelay period and not yet ended).
boolean isStarted()
Returns whether this Animator has been started and not yet ended.
static ValueAnimator ofFloat(float... values)
Constructs and returns a ValueAnimator that animates between float values.
static ValueAnimator ofInt(int... values)
Constructs and returns a ValueAnimator that animates between int values.
static ValueAnimator ofObject(TypeEvaluator evaluator, Object... values)
Constructs and returns a ValueAnimator that animates between Object values.
static ValueAnimator ofPropertyValuesHolder(PropertyValuesHolder... values)
Constructs and returns a ValueAnimator that animates between the values specified in the PropertyValuesHolder objects.
void pause()
Pauses a running animation.
void removeAllUpdateListeners()
Removes all listeners from the set listening to frame updates for this animation.
void removeUpdateListener(ValueAnimator.AnimatorUpdateListener listener)
Removes a listener from the set listening to frame updates for this animation.
void resume()
Resumes a paused animation, causing the animator to pick up where it left off when it was paused.
void reverse()
Plays the ValueAnimator in reverse.
void setCurrentPlayTime(long playTime)
Sets the position of the animation to the specified point in time.
ValueAnimator setDuration(long duration)
Sets the length of the animation.
void setEvaluator(TypeEvaluator value)
The type evaluator to be used when calculating the animated values of this animation.
void setFloatValues(float... values)
Sets float values that will be animated between.
static void setFrameDelay(long frameDelay)
The amount of time, in milliseconds, between each frame of the animation.
void setIntValues(int... values)
Sets int values that will be animated between.
void setInterpolator(TimeInterpolator value)
The time interpolator used in calculating the elapsed fraction of this animation.
void setObjectValues(Object... values)
Sets the values to animate between for this animation.
void setRepeatCount(int value)
Sets how many times the animation should be repeated.
void setRepeatMode(int value)
Defines what this animation should do when it reaches the end.
void setStartDelay(long startDelay)
The amount of time, in milliseconds, to delay starting the animation after start() is called.
void setValues(PropertyValuesHolder... values)
Sets the values, per property, being animated between.
void start()
Starts this animation.
String toString()
Returns a string containing a concise, human-readable description of this object.
[Expand]
Inherited Methods
From class android.animation.Animator
From class java.lang.Object

Constants

public static final int INFINITE

Added in API level 11

This value used used with the setRepeatCount(int) property to repeat the animation indefinitely.

Constant Value: -1 (0xffffffff)

public static final int RESTART

Added in API level 11

When the animation reaches the end and repeatCount is INFINITE or a positive value, the animation restarts from the beginning.

Constant Value: 1 (0x00000001)

public static final int REVERSE

Added in API level 11

When the animation reaches the end and repeatCount is INFINITE or a positive value, the animation reverses direction on every iteration.

Constant Value: 2 (0x00000002)

Public Constructors

public ValueAnimator ()

Added in API level 11

Creates a new ValueAnimator object. This default constructor is primarily for use internally; the factory methods which take parameters are more generally useful.

Public Methods

public void addUpdateListener (ValueAnimator.AnimatorUpdateListener listener)

Added in API level 11

Adds a listener to the set of listeners that are sent update events through the life of an animation. This method is called on all listeners for every frame of the animation, after the values for the animation have been calculated.

Parameters
listener the listener to be added to the current set of listeners for this animation.

public void cancel ()

Added in API level 11

Cancels the animation. Unlike end(), cancel() causes the animation to stop in its tracks, sending an onAnimationCancel(Animator) to its listeners, followed by an onAnimationEnd(Animator) message.

This method must be called on the thread that is running the animation.

public ValueAnimator clone ()

Added in API level 11

Creates and returns a copy of this Object. The default implementation returns a so-called "shallow" copy: It creates a new instance of the same class and then copies the field values (including object references) from this instance to the new instance. A "deep" copy, in contrast, would also recursively clone nested objects. A subclass that needs to implement this kind of cloning should call super.clone() to create the new instance and then create deep copies of the nested, mutable objects.

Returns
  • a copy of this object.

public void end ()

Added in API level 11

Ends the animation. This causes the animation to assign the end value of the property being animated, then calling the onAnimationEnd(Animator) method on its listeners.

This method must be called on the thread that is running the animation.

public float getAnimatedFraction ()

Added in API level 12

Returns the current animation fraction, which is the elapsed/interpolated fraction used in the most recent frame update on the animation.

Returns
  • Elapsed/interpolated fraction of the animation.

public Object getAnimatedValue ()

Added in API level 11

The most recent value calculated by this ValueAnimator when there is just one property being animated. This value is only sensible while the animation is running. The main purpose for this read-only property is to retrieve the value from the ValueAnimator during a call to onAnimationUpdate(ValueAnimator), which is called during each animation frame, immediately after the value is calculated.

Returns
  • animatedValue The value most recently calculated by this ValueAnimator for the single property being animated. If there are several properties being animated (specified by several PropertyValuesHolder objects in the constructor), this function returns the animated value for the first of those objects.

public Object getAnimatedValue (String propertyName)

Added in API level 11

The most recent value calculated by this ValueAnimator for propertyName. The main purpose for this read-only property is to retrieve the value from the ValueAnimator during a call to onAnimationUpdate(ValueAnimator), which is called during each animation frame, immediately after the value is calculated.

Returns
  • animatedValue The value most recently calculated for the named property by this ValueAnimator.

public long getCurrentPlayTime ()

Added in API level 11

Gets the current position of the animation in time, which is equal to the current time minus the time that the animation started. An animation that is not yet started will return a value of zero.

Returns
  • The current position in time of the animation.

public long getDuration ()

Added in API level 11

Gets the length of the animation. The default duration is 300 milliseconds.

Returns
  • The length of the animation, in milliseconds.

public static long getFrameDelay ()

Added in API level 11

The amount of time, in milliseconds, between each frame of the animation. This is a requested time that the animation will attempt to honor, but the actual delay between frames may be different, depending on system load and capabilities. This is a static function because the same delay will be applied to all animations, since they are all run off of a single timing loop. The frame delay may be ignored when the animation system uses an external timing source, such as the display refresh rate (vsync), to govern animations.

Returns
  • the requested time between frames, in milliseconds

public TimeInterpolator getInterpolator ()

Added in API level 11

Returns the timing interpolator that this ValueAnimator uses.

Returns
  • The timing interpolator for this ValueAnimator.

public int getRepeatCount ()

Added in API level 11

Defines how many times the animation should repeat. The default value is 0.

Returns
  • the number of times the animation should repeat, or INFINITE

public int getRepeatMode ()

Added in API level 11

Defines what this animation should do when it reaches the end.

Returns

public long getStartDelay ()

Added in API level 11

The amount of time, in milliseconds, to delay starting the animation after start() is called.

Returns
  • the number of milliseconds to delay running the animation

public PropertyValuesHolder[] getValues ()

Added in API level 11

Returns the values that this ValueAnimator animates between. These values are stored in PropertyValuesHolder objects, even if the ValueAnimator was created with a simple list of value objects instead.

Returns
  • PropertyValuesHolder[] An array of PropertyValuesHolder objects which hold the values, per property, that define the animation.

public boolean isRunning ()

Added in API level 11

Returns whether this Animator is currently running (having been started and gone past any initial startDelay period and not yet ended).

Returns
  • Whether the Animator is running.

public boolean isStarted ()

Added in API level 14

Returns whether this Animator has been started and not yet ended. This state is a superset of the state of isRunning(), because an Animator with a nonzero startDelay will return true for isStarted() during the delay phase, whereas isRunning() will return true only after the delay phase is complete.

Returns
  • Whether the Animator has been started and not yet ended.

public static ValueAnimator ofFloat (float... values)

Added in API level 11

Constructs and returns a ValueAnimator that animates between float values. A single value implies that that value is the one being animated to. However, this is not typically useful in a ValueAnimator object because there is no way for the object to determine the starting value for the animation (unlike ObjectAnimator, which can derive that value from the target object and property being animated). Therefore, there should typically be two or more values.

Parameters
values A set of values that the animation will animate between over time.
Returns
  • A ValueAnimator object that is set up to animate between the given values.

public static ValueAnimator ofInt (int... values)

Added in API level 11

Constructs and returns a ValueAnimator that animates between int values. A single value implies that that value is the one being animated to. However, this is not typically useful in a ValueAnimator object because there is no way for the object to determine the starting value for the animation (unlike ObjectAnimator, which can derive that value from the target object and property being animated). Therefore, there should typically be two or more values.

Parameters
values A set of values that the animation will animate between over time.
Returns
  • A ValueAnimator object that is set up to animate between the given values.

public static ValueAnimator ofObject (TypeEvaluator evaluator, Object... values)

Added in API level 11

Constructs and returns a ValueAnimator that animates between Object values. A single value implies that that value is the one being animated to. However, this is not typically useful in a ValueAnimator object because there is no way for the object to determine the starting value for the animation (unlike ObjectAnimator, which can derive that value from the target object and property being animated). Therefore, there should typically be two or more values.

Since ValueAnimator does not know how to animate between arbitrary Objects, this factory method also takes a TypeEvaluator object that the ValueAnimator will use to perform that interpolation.

Parameters
evaluator A TypeEvaluator that will be called on each animation frame to provide the ncessry interpolation between the Object values to derive the animated value.
values A set of values that the animation will animate between over time.
Returns
  • A ValueAnimator object that is set up to animate between the given values.

public static ValueAnimator ofPropertyValuesHolder (PropertyValuesHolder... values)

Added in API level 11

Constructs and returns a ValueAnimator that animates between the values specified in the PropertyValuesHolder objects.

Parameters
values A set of PropertyValuesHolder objects whose values will be animated between over time.
Returns
  • A ValueAnimator object that is set up to animate between the given values.

public void pause ()

Added in API level 19

Pauses a running animation. This method should only be called on the same thread on which the animation was started. If the animation has not yet been started or has since ended, then the call is ignored. Paused animations can be resumed by calling resume().

public void removeAllUpdateListeners ()

Added in API level 11

Removes all listeners from the set listening to frame updates for this animation.

public void removeUpdateListener (ValueAnimator.AnimatorUpdateListener listener)

Added in API level 11

Removes a listener from the set listening to frame updates for this animation.

Parameters
listener the listener to be removed from the current set of update listeners for this animation.

public void resume ()

Added in API level 19

Resumes a paused animation, causing the animator to pick up where it left off when it was paused. This method should only be called on the same thread on which the animation was started. Calls to resume() on an animator that is not currently paused will be ignored.

public void reverse ()

Added in API level 11

Plays the ValueAnimator in reverse. If the animation is already running, it will stop itself and play backwards from the point reached when reverse was called. If the animation is not currently running, then it will start from the end and play backwards. This behavior is only set for the current animation; future playing of the animation will use the default behavior of playing forward.

public void setCurrentPlayTime (long playTime)

Added in API level 11

Sets the position of the animation to the specified point in time. This time should be between 0 and the total duration of the animation, including any repetition. If the animation has not yet been started, then it will not advance forward after it is set to this time; it will simply set the time to this value and perform any appropriate actions based on that time. If the animation is already running, then setCurrentPlayTime() will set the current playing time to this value and continue playing from that point.

Parameters
playTime The time, in milliseconds, to which the animation is advanced or rewound.

public ValueAnimator setDuration (long duration)

Added in API level 11

Sets the length of the animation. The default duration is 300 milliseconds.

Parameters
duration The length of the animation, in milliseconds. This value cannot be negative.
Returns
  • ValueAnimator The object called with setDuration(). This return value makes it easier to compose statements together that construct and then set the duration, as in ValueAnimator.ofInt(0, 10).setDuration(500).start().

public void setEvaluator (TypeEvaluator value)

Added in API level 11

The type evaluator to be used when calculating the animated values of this animation. The system will automatically assign a float or int evaluator based on the type of startValue and endValue in the constructor. But if these values are not one of these primitive types, or if different evaluation is desired (such as is necessary with int values that represent colors), a custom evaluator needs to be assigned. For example, when running an animation on color values, the ArgbEvaluator should be used to get correct RGB color interpolation.

If this ValueAnimator has only one set of values being animated between, this evaluator will be used for that set. If there are several sets of values being animated, which is the case if PropertyValuesHolder objects were set on the ValueAnimator, then the evaluator is assigned just to the first PropertyValuesHolder object.

Parameters
value the evaluator to be used this animation

public void setFloatValues (float... values)

Added in API level 11

Sets float values that will be animated between. A single value implies that that value is the one being animated to. However, this is not typically useful in a ValueAnimator object because there is no way for the object to determine the starting value for the animation (unlike ObjectAnimator, which can derive that value from the target object and property being animated). Therefore, there should typically be two or more values.

If there are already multiple sets of values defined for this ValueAnimator via more than one PropertyValuesHolder object, this method will set the values for the first of those objects.

Parameters
values A set of values that the animation will animate between over time.

public static void setFrameDelay (long frameDelay)

Added in API level 11

The amount of time, in milliseconds, between each frame of the animation. This is a requested time that the animation will attempt to honor, but the actual delay between frames may be different, depending on system load and capabilities. This is a static function because the same delay will be applied to all animations, since they are all run off of a single timing loop. The frame delay may be ignored when the animation system uses an external timing source, such as the display refresh rate (vsync), to govern animations.

Parameters
frameDelay the requested time between frames, in milliseconds

public void setIntValues (int... values)

Added in API level 11

Sets int values that will be animated between. A single value implies that that value is the one being animated to. However, this is not typically useful in a ValueAnimator object because there is no way for the object to determine the starting value for the animation (unlike ObjectAnimator, which can derive that value from the target object and property being animated). Therefore, there should typically be two or more values.

If there are already multiple sets of values defined for this ValueAnimator via more than one PropertyValuesHolder object, this method will set the values for the first of those objects.

Parameters
values A set of values that the animation will animate between over time.

public void setInterpolator (TimeInterpolator value)

Added in API level 11

The time interpolator used in calculating the elapsed fraction of this animation. The interpolator determines whether the animation runs with linear or non-linear motion, such as acceleration and deceleration. The default value is AccelerateDecelerateInterpolator

Parameters
value the interpolator to be used by this animation. A value of null will result in linear interpolation.

public void setObjectValues (Object... values)

Added in API level 11

Sets the values to animate between for this animation. A single value implies that that value is the one being animated to. However, this is not typically useful in a ValueAnimator object because there is no way for the object to determine the starting value for the animation (unlike ObjectAnimator, which can derive that value from the target object and property being animated). Therefore, there should typically be two or more values.

If there are already multiple sets of values defined for this ValueAnimator via more than one PropertyValuesHolder object, this method will set the values for the first of those objects.

There should be a TypeEvaluator set on the ValueAnimator that knows how to interpolate between these value objects. ValueAnimator only knows how to interpolate between the primitive types specified in the other setValues() methods.

Parameters
values The set of values to animate between.

public void setRepeatCount (int value)

Added in API level 11

Sets how many times the animation should be repeated. If the repeat count is 0, the animation is never repeated. If the repeat count is greater than 0 or INFINITE, the repeat mode will be taken into account. The repeat count is 0 by default.

Parameters
value the number of times the animation should be repeated

public void setRepeatMode (int value)

Added in API level 11

Defines what this animation should do when it reaches the end. This setting is applied only when the repeat count is either greater than 0 or INFINITE. Defaults to RESTART.

Parameters
value RESTART or REVERSE

public void setStartDelay (long startDelay)

Added in API level 11

The amount of time, in milliseconds, to delay starting the animation after start() is called.

Parameters
startDelay The amount of the delay, in milliseconds

public void setValues (PropertyValuesHolder... values)

Added in API level 11

Sets the values, per property, being animated between. This function is called internally by the constructors of ValueAnimator that take a list of values. But a ValueAnimator can be constructed without values and this method can be called to set the values manually instead.

Parameters
values The set of values, per property, being animated between.

public void start ()

Added in API level 11

Starts this animation. If the animation has a nonzero startDelay, the animation will start running after that delay elapses. A non-delayed animation will have its initial value(s) set immediately, followed by calls to onAnimationStart(Animator) for any listeners of this animator.

The animation started by calling this method will be run on the thread that called this method. This thread should have a Looper on it (a runtime exception will be thrown if this is not the case). Also, if the animation will animate properties of objects in the view hierarchy, then the calling thread should be the UI thread for that view hierarchy.

public String toString ()

Added in API level 11

Returns a string containing a concise, human-readable description of this object. Subclasses are encouraged to override this method and provide an implementation that takes into account the object's type and data. The default implementation is equivalent to the following expression:

   getClass().getName() + '@' + Integer.toHexString(hashCode())

See Writing a useful toString method if you intend implementing your own toString method.

Returns
  • a printable representation of this object.